THIS PAGE WILL HOLD ANY INSTRUCTIONS OR IDEAS FOR OUR MODELS 

we recommend that all models are either superglued(be careful!!) or hot glue gunned together.....

PLEASE NOTE THIS PAGE IS WORK IN PROGRESS SO MAY BE LIMITED AT THE MOMENT THANK YOU.

IF YOU HAVE ANY OF OUR MODELS AND HAVE A MODELING IDEA DROP US A LINE AND WE WILL (IF SENSIBLE )INCLUDE ON THIS PAGE.

WE RECOMEND YOU GET SOME SMALL PLASTIC TUBE AND A THN STURDY WIRE AND ATTATCH TO DOOR RAMP SO CAN BE MOVED UP AND DOWN. ALSO WHY NOT DRILL INTO RESIN CAREFULLY AND INSERT TINY MAGNET TO HOLD CONNING TOWER IN PLACE !!   WE RECOMMEND YOU WASH AND DRY BEFORE PAINTING AND RECOMMEND A ACRILIC BASED CAR GREY PRIMER AS A UNDERCOAT.

THE LCT-5 WAS USED TO CARRY TANKS ASHORE SO WHY NOT REPLACE THE F.O.W. LANDING CRAFT WITH THE PROPER TANK CRAFT?

.

THE GERMAN STAFF CAR IS SUPPLIED WITH A THIN PEICE OF CLEAR ACETATE THIS SHOULD BE CUT INTO A WINDOW FOR THE CAR APPROXIMITLY 14MM WIDE AND 5MM HIGH . THE WINSCREEN EDGE IS BEST DONE BY PUTTING THE CUT SCREEN ON A PEICE OF WHITE PAPER AND DRAWING A LINE ON EDGE WITH PERMINENT BLACK MARKER ALL THE WAY ROUND THERE SHOULD BE ENOUGH ACETATE FOR YOU TO PRACTICE ON FIRST...IF YOUR HANDS ARE STEADY ENOUGH YOU COULD PAINT IT....DO NOT USE SUPERGLUE TO GLUE WINDOW ON AS WILL DISCOLOUR IT USE NORMAL PLASTIC MODEL CEMENT.

Make a free website with Yola